Now to make sure our Big feet fit in the footwell.

We have decided to increase our footroom by moving the inner wall "nearest the accelerator" outwards by an inch and a half, so we made a box section of aluminium and pop rivetted it in place so it was as far out as we could without it touching the Outer sidepanel.
The forward bend will attach to the front part of the footwell.
Joey sealed it all up RTV.

White RTV is much cheaper than the black stuff

Once we did the front footwell panel the rest is easy they can all be fitted flat against the chassis, we are again using aluminium sheet rather than stainless which will save weight.

Nice one Joey