Joey's car gets its Suspension and Wheels
Only temporary though, we have not done the brake inner bits yet."Brakes, Who needs them?"
This is quite a nice part of the build because you can move the car around on its own wheels,
and spend ages jumping up and down on the rear Hoop.
Fitting the rear Zeemerides was very simple, we fitted the top bracket to the Zeemer and it slots in place at the bottom of the Roll Bar, we have not drilled the hole to secure the bracket to the chassis because at this time we were not too sure if we needed to trim anything off the chassis at this position. In the end we did not trim off anything. The bottom end of the Coilover slots into the hole on the trailing wishbone so no problems there.